We offer ISO standard NC hydraulic press brakes, that are acknowledged amidst our clients for high durability and operational efficiency. These press brakes offer minimum set-up, fastest stroke cycles for all the jobs and minimize the requirement to refer drawings for repeat runs. Apart from this, these machines enable the operators to bend jobs with 1 to 4 bends on each edge in one set up time and thereby reduce the handling time & work-in-progress costs.

Capacity:

20 MT x 500 MT

Width:

1500 mm x 6000 mm

Slogan:

“Perform Complex Jobs, Cost Effective, Reliable, Time-after-time”

Short Facts:

• Fitted with 2 Axes NC controller viz., provided with NC stroke & NC back guage which offers better economy for multiple bend jobs. Setting of regular jobs can be stored in memory to save time. Allows air bending of different angles by memorizing stroke positions.
• Enables operator to bend jobs with 1 to 4 bends on each edge in one set up time, reducing handling time, inventory of semi-finished jobs & work-in-progress costs.
• Offers reduced set-up, fastest stroke cycles for all jobs, minimizes the need to refer drawings for repeat runs.
• Back guage retraction on pinch point.

NC controllers & drives:

The controller memorizes 792(=8 bends per program * 99 programs) stroke positions to store most popular bends, stroke length, stores height of tool data 10 pairs of punches & dies to avoid faulty programming. Allows skipping a step in program if the bend is not required on the job. The controller can be connected directly to computer via RS232 serial for data backup.